Видео

A great job. I presume that the ivy canopy will eventually fall out of the trees.

After you cut the vines and they die, do you need to go up the tree and remove the dead vines? Or are you all done at this point, and the vines will just rot and fall off naturally?

Hey. So, I have this washer. I’ve had random issues over the past few months of the door not locking all the way. Well, noticed this morning, went to go turn the washer on, all the lights blinked really fast one time and the washer won’t power up at all. I’ve unplugged it for an hour and tried again, same thing. Could this door switch cause that to happen?

Very entertainig and informative

Thanks, good video but no mention of adjusting the light, which I'm still trying to figure out. Maybe your unit doesn't have one. I will add that Toto has the worst manual of any appliance I've used in 50 years!

I have one box that has 2 red, 2 black, 1 green. The other 2 boxes have 1 red, 1 black, 1 green. There is neutral in all 3 boxes. I have 3 way switches. I want all the switches to be Kasa for ascetics. How do I wire this thing?

Finally someone with worse ivy than me.

poles rot when put into concrete so yeah don't do this

Now I am totally convinced! These arguments were so consistent that have to switch from VS code with vim to Emacs. Thank you for convincing me! Please upload more intellectually videos just like this in the near future!

Cross legged? Mother nature will break you of that habit very soon! 😅

YAYYYYY

Hey, I'm just in the DIY planning phase for this. Thanks a lot for this in-depth video. Absolutely amazing wealth of knowledge. Also in CA / Bay Area. No kidding on the stubborn "This is my interpretation of code, no room for debate" issue. Even quoting code at them is like talking to a brick wall...

Thank you so much for telling me how to turn off the heated seat during our 90f heatwave. Greatly appreciated!

Thanks for the video very helpful. My door switch stopped working, for a temporary fix I took the unit apart and bent the door switch contacts up they would be made all the time, then put it all back together.

Shown by Channel Four, actually.

Hopefully this isn't too upsetting but I'm halfway through your video and have the same model. It's actually one of the first 100 made. Anyway if you squeeze the 2 red squares for the battery release hard it slides down pretty easy to expose the yellow cells

Okay so every time I come I have to reset the back and forth jerk setting. Got it. 😂

What if the light fixture is crackling/popping inconsistently.

The description here with the animation accompanying was great!

Thanks! I saw your video after I took mine all apart, but I needed to know what size hose and where to buy it. Thanks for your great video. Btw, I used a small adjustable wrench to press the hose couplings and release them, it presses both sides at once.

I’m with Lockhart

I know this is 5 yrs old, but an awesome vid, and your sense of humor is fabulous!! Thanks for the info, hope I can fix my 3rd controller which is dead!!

My Washlet is more familiar to me now thanks to your video. Thanks.

Yes that's how you should explain it, thanks.

Very helpful, thanks.

i agree but would it be better to run mojave or big sur on a 2014 mac now? if those were hypothetically my real life options. i dont know enough to gauge the importance of keeping a 32 bit mac around, or how easy VMware stuff has gotten on newer macs

I'm late to the party, but I just did this to my live oaks here in Tallahassee, FL. Only difference is I didn't have English Ivy... it was Poison Ivy. Looked just like your situation. Heavy cutting was done with a 16" battery chainsaw and the rest with loppers. After a couple of slices, the big vines pulled right off. I actually pulled a vine run that was over 40 feet. I covered my entire body pretty well, but I have a few rashes developing. For the rest of my trees (like 7-8) I'll wear a hazmat suit for. Thanks for the vid.

Awesome video WardCo. Thank you very much. Just installed one on a new Toto toilet so learning the nuances was greatly helped by you with an in depth instructional. The booklet falls way too short. Also, the installation instructions left something to be desired. Kudos to you. Now on to the complainers. Whaa! Whaa! There are some black mineral deposits. That is what my turd gulpers look like depending on the well water. Very hard to get rid of without using a volcanic rock scrubber. Not supposed to do that nor use chlorox. I do use borax on occasion and the stain remain for some time. Eventually the problem helps solve itself only to reappear. So for the critics out there. Shut it!

GE designated this type of construction as a "mechanized chassis" but it is difficult to find references to that name. WardCo provides a list of model numbers with an F suffix. The F designates the "mechanized chassis" version, so model 510F had that construction but model 510 did not. My model 535 "radio clock", a 6 tube clock radio, had a "mechanized chassis". Probably there was no F suffix because all model 535 radios had the "mechanized chassis". The radios had the donuts over the solder wells, presumably for safety, so no one would get a shock from touching wells if they poked fingers through the ventilation holes on the back. My parents owned a 1954 GE console TV which also used this construction, but the solder wells were not covered. GE depended on the back cover AC power cord interlock to safely power down the set before someone touched the wells. I recall that Zenith continued to use this type of construction well into the 1960s for its "hand crafted" TV sets, while competitors had gone to printed wiring boards. Zenith did not have the donuts, either. In production, this type of construction probably reduced the number of wiring errors made by assemblers, since the component layout was more orderly. Also, when errors were made, they were probably easier to spot by the technicians testing the radios as they came off the production line.

Hello, I have a question please. Once you use a rear or front feature, does it stop automatically or do you have to press something else to stop it or to go on to another feature? Say for example, I use the feminine feature then want to dry. Do I have to manually stop the feminine water or does just pressing the dryer stop the water? Mahalo!!!

Awesome video

Super appreciate you taking the time to thoroughly go through all of this!

Good afternoon! I am attempting to use the kasa230 kit (usa 2.26) with a 4 way mechanical switch between the main and satellite switches. If the manual 4 way state is not changed, then expected results occur. Either switch controls on/off state and either switch can control dimming. The voltage from either traveler to neutral is identical as measured with a Fluke 179. If the manual 4 way switch changes state, dimming control is lost. The load is presented with full source voltage. However either main or satellite switches can turn load off/ on Can you provide insight and also offer a way to construct a dimming 4 way switch design?

What is that beige-looking thing on the wall to the right of your monitor :)

Hello sir, recently got a classic aeron from marketplace in a very good deal, and I was wondering if the seat link screw are supposed to be tighten strongly or is there supposed to have a bit of play in it. (english is not my main language, sorry for grammatical error)

Electrical work is all about redundancies. Commentary is annoying and unhelpful like congrats you know what a service drop is but you dont gotta act like they dont know what those JLs are doing

I would have thrown away the amp and had 2 passive speakers

If you had a GE set from the 60's with a curcuit board you would be dealing with "Griplets which were a tiny hollow rivet in all through holes Everyone hates them.

I will sum it up in one word. "Awesome! " Your explanation is perfection. Thank you!

Who uses a dirty toilet bowl to demonstrate the cleaning benefits of a washout?!

Thank you for this valuable information. My behringer 1200w speaker does not power on. The fuse was changed out but still has no power. It's a great speaker, but having difficulty finding a speaker tech to work on my speaker. Thank you.

That cloud line was the NSA not the CIA. Stop disparaging the spooks.

You know absolutely nothing about what you are taking about 😅

❤😊They are replacing our power pole tomorrow here 😊 thank you for video, Knowledge And Letting me know Time frame 😊

Hey thanks man ! Here’s a little tip … when you put the little screwdriver in the edge to separate the red top from the black body of the drill you just need to get alittle gap between them then push on the red buttons on the side and that will disengage the black clips so you don’t break them … at least that’s my experience while watching you

31:22 the main issue with the squirrels is, they were probably getting shocked by the arrester and bushing on the old transformer because it did not contain animal guards. If you look at the new transformer, you can see it came with the animal guards for this purpose

the "Konnichiwa bitches" killed me LOL

I have an TiVo edge and just wanna make the make the HD bigger. There is a sea gate 4TB Sata on Amazon, can I just swap it out and it will format etc? I do not care about losing my current recordings

It’s amazing you talk so much about something which you know very little about….

A much better method is to simple remove the gear train assembly from the case, clean it in an ultrasonic cleaner, re-lubricate with synthetic AFT and seal it up with epoxy.